Belt problem

[hjaltig]

Hei alle

I have just ran my H9 of one of the belt, dose any one have some info on how I shuld get the belt back on track?

I was told it was a screw and then use a pulle .

I am new to excavator operation

[Jevlar]

Do you mean a belt on the engine or the track the machine runs on?

[AntonNormark]

My guess is that you mean the track, i´ve only done this one time,with the help of professionals, byt they took appart the track, so they could pull it in place under the guide-wheels, loosened the track-tension, and pulled it together again, bolted the track back together, last part was to get the right tension on the track.. (by pumping grease the normal way)

I´m sorry for my poor english, I hope that some of this is useful!
Good luck!

//Anton

[hjaltig]

Yes I ment the track.

Thank you for the info

I got the track back on buy unscrewing the bolt holding the grease and using a pully to pull back the wheel and using the machine to lift it self of the track and then moving it in the right place and then pumped in the grease until I got some tension. this only took me 3 hrs.