Maskinistens Twitter-flöde  Stöd Maskinisten via Patreon  Maskinistens nätverk - information på svenska  Maskinistens nätverk - information på finska  Maskinistens nätverk - information på norska  Maskinistens nätverk - information på danska  Maskinistens nätverk - information på isländska
Forumindex

ForumindexForumindexMaskin-databasFotoalbumKalender-informationKöp & SäljDownloadsLexikonKontaktregisterMaskinistenin rikosrekisteri

Åkerman-register
Visa forum för mobila enheter

ForumindexMaskinforumThe Hymac ClubHymac Technology

Hymac 580C Restoration

60 inlägg • Sida 1 av 4
Discuss Hymac technology here.
Diskutera Hymac-teknik här. Obs! Forumet är på engelska!

David.Mattsson (trådstartaren)

#1 » 20:23:24, 22-09-2009
  • Överför markerat ord till lexikonet

Today I drove my "new" Hymac from its resting place where it has been sitting fore some years, and parked it next to the nerest road for transport home.
There are some things neding to be sorted, sutch as Service filters and oil.
Have the tracs rear non driving wheels removed and chekt out du to bad bussings ?
Som new Glas/windows in the cab front and rear left.
And a hot Bath with Biosolve solvant.
The Trailer will hopefully pick it upp before the weekend if I´m lucky.
I will be there and get it on so there will probably be som pictures taken to
Sorry for my bad spelling

Bild

Bild

Bild

Bild

Bild

Bild

Bild

Bild
Senast redigerad av David.Mattsson 18:58:13, 04-10-2009, redigerad totalt 4 gånger.
Användarvisningsbild
David.Mattsson
Fler än 100 inlägg
 
Blev medlem: 15:23:26, 19-09-2009
Ort: Ryd
Sverige
Maskintyp: Traktorgrävare
Maskin: JCB



Robban_C

#2 » 22:06:22, 22-09-2009
  • Överför markerat ord till lexikonet

Hi and welcome!

David.Mattsson skrev:... Sorry for my bad spelling ...
You don´t have to excuse your spelling. We understand it and i case we don´t understand it we will ask for an explanation. :thumme:

Congrats to your new machine! Looks nice for its age. :thummar: :driver:


In case you wonder:
I can see from your name that you are Swedish but this part of the forum is in English and the reason is that we have a few English speaking members that are very fond of old Hymac. And their knowledge about those old machines are invaluable.
So stay tuned with your English (it´s good enough!) and if it gets really difficult switch to Swedish and you will soon get help with translating.
Har slutat på forumet!
Användarvisningsbild
Robban_C
Fler än 500 inlägg
 
Blev medlem: 22:13:25, 11-06-2006
Ort: Norra Södermanland
Sverige
Maskintyp: Grävmaskin (larvburen)
Maskin: Volvo EC45 -06
Volvo ECR25D -17
MB-Trac 800 -86
Valtra N174D -17

Holger

#3 » 09:16:35, 23-09-2009
  • Överför markerat ord till lexikonet

Hi and very welcome David!
Great looking machine! :grin:
Användarvisningsbild
Holger
Webmaster
Webmaster
 
Blev medlem: 10:54:48, 12-10-2003
Ort: Hannover
Sverige
Maskintyp: Hjullastare
Maskin: Test

David.Mattsson (trådstartaren)

#4 » 20:03:05, 25-09-2009
  • Överför markerat ord till lexikonet

Finaly its at home and unloaded
HAd som hard work loding it as it wanted to slide off the small raps
Thank god i dident used a Mega trailer and insted aked another frind with a [ Svanhalstrailer ]

ther will be more pictures when i start working on it.
Sorry fro not hawing a foto of the compleat Trailer but my girlfrind held the camera while i was unloading.

The Lorry is a MAN TGX that is owend by a frind of mine.

Buy The way i hawe been toold from the previus owner that it shold be a 1980 but i m not sure annyone that can tell anything from the pictures ?
I was thinking or the ID plats if they wer cast or not is Pre 75 etc
Du har inte behörighet att öppna de filer som bifogats till detta inlägg.
Senast redigerad av David.Mattsson 20:06:54, 25-09-2009, redigerad totalt 1 gång.
Användarvisningsbild
David.Mattsson
Fler än 100 inlägg
 
Blev medlem: 15:23:26, 19-09-2009
Ort: Ryd
Sverige
Maskintyp: Traktorgrävare
Maskin: JCB

Robban_C

#5 » 22:25:44, 25-09-2009
  • Överför markerat ord till lexikonet

I don´t know how to translate "Svanhalstrailer" but anyone can see the type of trailer on the pic above.

And now a Swedish lesson for our English members:
A "svanhals" is the neck of a swan. So now you know where we got the Swedish name of those trailers. :grin:
Har slutat på forumet!
Användarvisningsbild
Robban_C
Fler än 500 inlägg
 
Blev medlem: 22:13:25, 11-06-2006
Ort: Norra Södermanland
Sverige
Maskintyp: Grävmaskin (larvburen)
Maskin: Volvo EC45 -06
Volvo ECR25D -17
MB-Trac 800 -86
Valtra N174D -17

nixs

#6 » 22:28:20, 25-09-2009
  • Överför markerat ord till lexikonet

Goseneck could bee the correct English word
Det finns två sorters människor, de som får saker gjorda och de som tar åt sig äran.
Det gäller att tillhöra den förstnämnda för i den är det lägre konkurrens!

Dubito, ergo cogito, ergo sum
nixs
Fler än 500 inlägg
 
Blev medlem: 23:29:17, 06-01-2006
Maskintyp: Ej angivet

Robban_C

#7 » 22:38:26, 25-09-2009
  • Överför markerat ord till lexikonet

Yes, I think you´re right Niklas!
Thanks! :thumme:
Har slutat på forumet!
Användarvisningsbild
Robban_C
Fler än 500 inlägg
 
Blev medlem: 22:13:25, 11-06-2006
Ort: Norra Södermanland
Sverige
Maskintyp: Grävmaskin (larvburen)
Maskin: Volvo EC45 -06
Volvo ECR25D -17
MB-Trac 800 -86
Valtra N174D -17

Jeremy Rowland

#8 » 23:55:52, 25-09-2009
  • Överför markerat ord till lexikonet

Hi David, :wave:

Your 580C looks to be in very good condition for its age but I would suspect that it was a little earlier than a 1980 machine.
If you need any technical help then I will always try to help you when ever I can.
Please keep us updated with pictures and information.
Thanks.

Jeremy
Jeremy Rowland
Fler än 100 inlägg
 
Blev medlem: 23:02:49, 25-10-2006
International

Anders Berg

#9 » 00:14:23, 26-09-2009
  • Överför markerat ord till lexikonet

I also think it´s older than 1980. I would guess early ´70, is closer. Iguess so because of the sliding door and the shifters(spakarna). My machine was a 580B, late -60, and i think BT came close after that, then there is 580c and later ct with short shifters and an ordinary door.
But i´m not really sure, they all look very much the same, only smaller diffrents.
Användarvisningsbild
Anders Berg
Fler än 500 inlägg
 
Blev medlem: 14:00:56, 10-12-2006
Ort: Flurheden, Älvsbyn
Maskintyp: Grävmaskin (hjulburen)
Maskin: Volvo BM 4200
MF Robur
Brøyt X21
Volvo N10
Scania 76 Super
Volvo FM 12 Spol/slam
Volvo FH 480
Volvo L70F

David.Mattsson (trådstartaren)

#10 » 20:27:15, 26-09-2009
  • Överför markerat ord till lexikonet

I found a Sticker inside the cab with an approval from Svenska Ångpanneföreningen ? annyway its dated 1973 withtch might be a more correct Year maybee 1972 mfg year.

Today i hawe Cleand it and cleand out the Diesel tank that containd Water and Rust. tock over 5 houers i used a Kupé heater to dry the inside after clening with high pressure.

On the way home :driver:
Bild


Parked Outside the barn befor cleaning
Bild

Bild

Bild

Bild

Dan Gyldmark came and had a look at my new "toy"
he ist the one digging on the picture.
Bild
Amazing what a litel solvant can do maybe i will repaint it to its orginal color.
Bild


To be continued
Jag vet varför engelsmän dricker varm öl
Användarvisningsbild
David.Mattsson
Fler än 100 inlägg
 
Blev medlem: 15:23:26, 19-09-2009
Ort: Ryd
Sverige
Maskintyp: Traktorgrävare
Maskin: JCB

Daniel.A

#11 » 21:11:31, 26-09-2009
  • Överför markerat ord till lexikonet

Looks very nice, not bad at all... :thumme:
last person who have painted it might have some "Åkerman" dreams if you see to the color....but i dont understand why?
Hymac is the No.1 :cool:
Bm 400 -65, IH 2275 Traktorgrävare -64(såld), Hymac 580 BT, Bm 36 -57, Volvo F610 -80, Willys CJ-3A -50. Scania 81 -77, Scania 111, mm
Användarvisningsbild
Daniel.A
Fler än 100 inlägg
 
Blev medlem: 22:38:05, 22-08-2007
Ort: Istorp, Västra götaland
Maskintyp: Lastbil

Nick Drew

#12 » 22:29:37, 26-09-2009
  • Överför markerat ord till lexikonet

Hi David,

Thank you for posting these excellent photos of your Hymac! :buga:

I would say it is a mid 1970's model as I believe the sliding door was replaced by the hinged door around 78-79 period.

I am looking forward to seeing more photos of the restoration work :thummar:

Regards

Nick
Användarvisningsbild
Nick Drew
Fler än 500 inlägg
 
Blev medlem: 22:50:07, 30-09-2006
Ort: England
International

David.Mattsson (trådstartaren)

#13 » 22:57:39, 26-09-2009
  • Överför markerat ord till lexikonet

buy the way do annyone hawe the orginal paint code for this one ?
orginal the whole macine is the same color exept for the udercarrige ?
Jag vet varför engelsmän dricker varm öl
Användarvisningsbild
David.Mattsson
Fler än 100 inlägg
 
Blev medlem: 15:23:26, 19-09-2009
Ort: Ryd
Sverige
Maskintyp: Traktorgrävare
Maskin: JCB

Jeremy Rowland

#14 » 15:13:49, 27-09-2009
  • Överför markerat ord till lexikonet

Hello again David,

The sticker in the cab sounds accurate for the year of manufacture, for me it was the cast Hymac nameplate and older style boom that gave it away as an early 70's machine.
Sadly the one piece of information that I have been trying to get hold of is the original Hymac paint code which I have not yet to find out?
I do think the machine would look better in the original paint scheme, if anybody does have that paint code then please post it here.
I will endeavour to try and find out the paint code and publish it here if I do so.

Jeremy
Jeremy Rowland
Fler än 100 inlägg
 
Blev medlem: 23:02:49, 25-10-2006
International

David.Mattsson (trådstartaren)

#15 » 18:30:47, 28-09-2009
  • Överför markerat ord till lexikonet

Mecanical uppdate
Today i hawe fond a Glasmästare in Växjö that can help me with the front and side windows.

I haw also taken one of the tension whels out The busshing seem to be long gone.
i will bring it doown to my other work ther we hawe a Blow tortch (Butan+O2) i thin it will nead som heat

Bild

Bild

Bild

Bild

And No this ain´t my morning coffe :sad: i tried to heat it to get ridd of the water and this is after.
New Hydralic oil i must get but is it 46 or 32 that are most suited for this macine ?
Bild
Senast redigerad av David.Mattsson 18:32:05, 28-09-2009, redigerad totalt 1 gång.
Jag vet varför engelsmän dricker varm öl
Användarvisningsbild
David.Mattsson
Fler än 100 inlägg
 
Blev medlem: 15:23:26, 19-09-2009
Ort: Ryd
Sverige
Maskintyp: Traktorgrävare
Maskin: JCB


Återgå till Hymac Technology

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 4 gäster



Älmeboda Maskinservice

OilQuick

TK Traktordelar

Klaravik

Crazyride

Bra Verktyg

Motrab

Engcon

Scandcut

Astrak

Olsson Parts

Nya och begagnade
truckar på vstruck.se