Is there anyone that has a god solution to opening the complete top-front window?
Please with pictures
Forumindex ‹ Maskinforum ‹ The Hymac Club ‹ Hymac Technology
Front-top-window opinging, solution?
2 inlägg • Sida 1 av 1- Bevakas av: 2
- Bokmärkt av: 0
- Visningar: 1899
- GiZZmo
- Fler än 100 inlägg
- Blev medlem: 11:58:06, 22-03-2008
- Ort: Vårgårda
- Maskintyp: Grävmaskin (larvburen)
- Maskin: Takejob 235 -09
Hy-mac 580BT
John Deere 644B
Valmet 665 - 96
Case 844xl -86
Deutz Dx 140 -80
Volvo Bm 400
Mercedes Sprinter 518 Be trailer -08
Nissan Kingcab höjd 9" med 37" -06
Sittåträng Berlingo -11
Hi there 
from what I can recall the top window on the 580BT is a one piece window; however the two piece opening window from a 580C should fit straight in to your machine.
If your machine has already been fitted with a two piece window then it should push outwards, please note that sometimes the mechanism can stick with age so I would suggest carefully spraying the mechanism with a good quality freeing agent like WD40.
Hope that helps.
Jeremy
from what I can recall the top window on the 580BT is a one piece window; however the two piece opening window from a 580C should fit straight in to your machine.
If your machine has already been fitted with a two piece window then it should push outwards, please note that sometimes the mechanism can stick with age so I would suggest carefully spraying the mechanism with a good quality freeing agent like WD40.
Hope that helps.
Jeremy
Senast redigerad av Jeremy Rowland 19:14:35, 04-10-2012, redigerad totalt 1 gång.
- Jeremy Rowland
- Fler än 100 inlägg
- Blev medlem: 23:02:49, 25-10-2006
2 inlägg
• Sida 1 av 1
Vilka är online
Användare som besöker denna kategori: Inga registrerade användare och 1 gäst
