Maskinistens Twitter-flöde  Stöd Maskinisten via Patreon  Maskinistens nätverk - information på svenska  Maskinistens nätverk - information på finska  Maskinistens nätverk - information på norska  Maskinistens nätverk - information på danska  Maskinistens nätverk - information på isländska
Forumindex

ForumindexForumindexMaskin-databasFotoalbumKalender-informationKöp & SäljDownloadsLexikonKontaktregisterMaskinistenin rikosrekisteri

Åkerman-register
Visa forum för mobila enheter

ForumindexMaskinforumThe Hymac ClubHymac Technology

Rollers will not roll

6 inlägg • Sida 1 av 1
Discuss Hymac technology here.
Diskutera Hymac-teknik här. Obs! Forumet är på engelska!

rune stewen (trådstartaren)

#1 » 19:11:56, 06-04-2008
  • Överför markerat ord till lexikonet

Hello!
Now the bearings and the chains in the driving assembly are new on both sides.
The gearboxes and brakes are overhauled, the tracks have got a lot of new bolts to keep the trackpads in place.
The hydraulic system have got all tanks cleaned, new filters and clean oil.
Everything should be allright but it is´nt.
The roolers, there are 18, and 7 of them are not turning, 3 on one side and 4 on the other side. How bad is it?
I can´t get the bolts, keeping the rollers to the undercarriage frame, loose.
When I prolong the wrensch with a pipe the bolts breaks and I have to drill it out and then make new threads and that is not an easy thing to do.
Do you have any suggestions how to get rollers rolling again, without taking them down from the frame or how to loose the bolts without breaking them.
best regards Rune
Användarvisningsbild
rune stewen
Fler än 10 inlägg
 
Blev medlem: 21:53:23, 07-10-2007



dea

#2 » 19:37:50, 06-04-2008
  • Överför markerat ord till lexikonet

Is it possible to heat the bolts and then try to loose them?
dea
Fler än 500 inlägg
 
Blev medlem: 23:15:24, 09-09-2004
Ort: Njura, NordÖstra Skåne
Sverige
Maskintyp: Traktor
Maskin: IH 685
JD 6910
JD 6310
Fendt 815
BM 641

Nick Drew

#3 » 22:08:19, 06-04-2008
  • Överför markerat ord till lexikonet

Hi Rune, & Dea,

I was once told of a technique to free stuck rollers :wink:

Begin by slacking off the track, then insert a strong piece of timber so that the rollers are in contact with the wood, then with the weight of the machine on the timber try moving the track backwards and forwards and in some cases this is enough to free them.

If this fails then you will need to strip them off and possibly replace them, or find a track repair centre to have them reconditioned.

Hope this helps :thummar:

Nick :mrgreen:
Användarvisningsbild
Nick Drew
Fler än 500 inlägg
 
Blev medlem: 22:50:07, 30-09-2006
Ort: England
International

rune stewen (trådstartaren)

#4 » 21:19:25, 07-04-2008
  • Överför markerat ord till lexikonet

Hi Nick and Dea!
Thank you for your good advices :buga: .
This morning I tryed the timbermethod and after one hour, there was just two rollers still not turning.
Those two rollers I had to strip from the frame and by heating the area around the bolts, six of the bolts gave up and came out in one pice. Just two needed drilling and new threads :grin: .
I have also found a scrapyard selling rollers for 80 euro.

Worked better then expected :thummar:
Rune
Användarvisningsbild
rune stewen
Fler än 10 inlägg
 
Blev medlem: 21:53:23, 07-10-2007

Nick Drew

#5 » 21:46:35, 07-04-2008
  • Överför markerat ord till lexikonet

Thats great news Rune :thummar:

Glad it all turn out well :wink:

Nick :cool:
Användarvisningsbild
Nick Drew
Fler än 500 inlägg
 
Blev medlem: 22:50:07, 30-09-2006
Ort: England
International

drivax

#6 » 23:04:00, 06-10-2009
  • Överför markerat ord till lexikonet

I think that älmeboda maskinservice has restorde rollers for ca 800sek +moms
man är inte småläning för det är roligt!!
drivax
Fler än 100 inlägg
 
Blev medlem: 02:17:48, 23-01-2008
Ort: Långasjö
Maskintyp: Traktor
Maskin: Bm 646
ih 674
bm 230 victor
SMW drivax


Återgå till Hymac Technology

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 2 gäster



Älmeboda Maskinservice

OilQuick

TK Traktordelar

Klaravik

Crazyride

Bra Verktyg

Motrab

Engcon

Scandcut

Astrak

Olsson Parts

Nya och begagnade
truckar på vstruck.se