Hello!
Now the bearings and the chains in the driving assembly are new on both sides.
The gearboxes and brakes are overhauled, the tracks have got a lot of new bolts to keep the trackpads in place.
The hydraulic system have got all tanks cleaned, new filters and clean oil.
Everything should be allright but it is´nt.
The roolers, there are 18, and 7 of them are not turning, 3 on one side and 4 on the other side. How bad is it?
I can´t get the bolts, keeping the rollers to the undercarriage frame, loose.
When I prolong the wrensch with a pipe the bolts breaks and I have to drill it out and then make new threads and that is not an easy thing to do.
Do you have any suggestions how to get rollers rolling again, without taking them down from the frame or how to loose the bolts without breaking them.
best regards Rune