Which one´s are you using?
Forumindex ‹ Maskinforum ‹ The Hymac Club ‹ Hymac Technology
Recommended lubricants?
6 inlägg • Sida 1 av 1- Bevakas av: 3
- Bokmärkt av: 0
- Visningar: 3566
In UK 0c - 27c
Would of been most widely used I think, I am sure Jeremy will confirm this
or correct me if I am wrong !
Nick
Would of been most widely used I think, I am sure Jeremy will confirm this
or correct me if I am wrong !
Nick
Please check out my blog http://www.earthmoversmagazine.co.uk/?page_id=3092
Join the Digger Man Blog Facebook page, click on this link to apply to become a member https://www.facebook.com/groups/1422908344617046/
Join the Digger Man Blog Facebook page, click on this link to apply to become a member https://www.facebook.com/groups/1422908344617046/
-
Nick Drew - Fler än 500 inlägg
- Blev medlem: 22:50:07, 30-09-2006
- Ort: England
I believe that Edis wants to know what oil quality's the Hymac numbers represents in ordinary categories.
Det finns två sorters människor, de som får saker gjorda och de som tar åt sig äran.
Det gäller att tillhöra den förstnämnda för i den är det lägre konkurrens!
Dubito, ergo cogito, ergo sum
Det gäller att tillhöra den förstnämnda för i den är det lägre konkurrens!
Dubito, ergo cogito, ergo sum
- nixs
- Fler än 500 inlägg
- Blev medlem: 23:29:17, 06-01-2006
- Maskintyp: Ej angivet
nixs skrev:I believe that Edis wants to know what oil quality's the Hymac numbers represents in ordinary categories.
Yes, it would be great with a table that says for example:
Track Gearbox: Mobilube SAE 80W/90
-
Edis - Fler än 100 inlägg
- Blev medlem: 15:30:55, 09-08-2008
- Maskintyp: Grävmaskin (larvburen)
- Maskin: Neuson 3703
OK Guys,
I think Jeremy will be needed on this one as he is more of a mechanic than me, I am merely an operator first and foremost
Over to you Jeremy
Nick
I think Jeremy will be needed on this one as he is more of a mechanic than me, I am merely an operator first and foremost
Over to you Jeremy
Nick
Please check out my blog http://www.earthmoversmagazine.co.uk/?page_id=3092
Join the Digger Man Blog Facebook page, click on this link to apply to become a member https://www.facebook.com/groups/1422908344617046/
Join the Digger Man Blog Facebook page, click on this link to apply to become a member https://www.facebook.com/groups/1422908344617046/
-
Nick Drew - Fler än 500 inlägg
- Blev medlem: 22:50:07, 30-09-2006
- Ort: England
Hi Edis and guys,
Well I must say I've had a look in the 580C operations and maintenance manual and although I have some idea of what oil types to use in machines over here, I would realistically say that due to the colder climate in Sweden this may not be the case with your machine?
I can contact Richard Gould or Tony Flint and confirm the exact spec of oil required.
What oil specs were you looking for? Hydraulic? Engine? or gearbox?
Jeremy
Well I must say I've had a look in the 580C operations and maintenance manual and although I have some idea of what oil types to use in machines over here, I would realistically say that due to the colder climate in Sweden this may not be the case with your machine?
I can contact Richard Gould or Tony Flint and confirm the exact spec of oil required.
What oil specs were you looking for? Hydraulic? Engine? or gearbox?
Jeremy
- Jeremy Rowland
- Fler än 100 inlägg
- Blev medlem: 23:02:49, 25-10-2006
6 inlägg
• Sida 1 av 1
Vilka är online
Användare som besöker denna kategori: Inga registrerade användare och 5 gäster
