Hymac 586S

[Antevante]

Hej! Har nu rotat runt här på sidan ett par dagar och vågar mig nu på en liten egen tråd.. Har febrilt letat info om gårdens hymac grävare. Dock med klent resultat. Osäker på årsmodell ska kolla upp detta.. Dock är den inte hymac grön länge tack och lov. Fungerar skapligt, inte så värst mycket till bromsar men gräva går ju fint. Deutz-motor som går som en klocka..
Såg det fanns en likadan ute på blocket nu och det är den första jag sett förutom denna.

[Holger]

Trevlig grävare du har där!
I Åkerman-färger!

Tack för bilderna!

[Robban_C]

Är det nån form av 2-delad bom? Bilder från den sidan?

Hymacforumet? Nick skulle bli överlycklig av att få se dessa bilder. Dessutom kommer han att kunna svara på massor av frågor.
Jag får nog skicka honom ett litet pm.

Hej o välkommen förresten!

[Antevante]

Hej! Ja bommen är delad där i första "knäcken" ska fixa lite bilder på det. Var nere i skogen igår å skulle försöka flytta grävaren till vinterförvaringen, slutade dock med mindre kabelbrand. Så nu blir det lite felsökning.. Förhoppningvis innan snön dyker upp...

[Robban_C]

Är det hydrauliskt 2-delat som på "moderna" maskiner eller är det mekaniskt? Eller skjutbart?
Ta du felsökningen och elreparationen i första hand, snön kan komma när som helst och jag är ju bara nyfiken i största allmänhet.

Och jag är _mycket_ förvånad över att Nick inte har dykt upp än. Du ska få se en som blir överlycklig av bilderna!
Fixar du engelskan? Annars översätter jag, Holger eller nån annan.

[Antevante]

Nej det ser bara ut som om att det vore delbart vill jag minnas... Inga som helst justeringsmöjligheter här inte:) Kanske bara en möjlighet att byta till en längre bom el likn.

Engelskan ska nog gå skapligt, som vanligt fackspåket som man hakar upp sig på men det ska nog gå bra.

[Nick Drew]

Hi Guys,

Holger & Robban C have informed me about this thread can someone please tell me a bit about what has been said here ??

I do not recognise this machine It doesn't even look like a Hymac to me

Nick

[Robban_C]

Nick:

New member Antevante, has been searching for info about the digger. Unknown year, not Hymac green anymore. Runs good, no brakes, Deutz engine that runs well.

Holger talks about Åkerman colours.

I asked about 2-piece boom. I also wrote that you should be glad to see these pictures.

Antevante had some minor electricity problems (fire in the electrics!) when he tried to move it.
Some talk about the 2-piece boom.

[Antevante]

Hi Nick!

Im looking for some info about my machine, and Im pretty sure of the fact that i is a Hymac... The Hymac colour in still there in the inside;) Guess it a rare machine ive got if you dont recognise it.

Here is a link to the other Hymac 586S wich is for sale..

http://www.blocket.se/vi/14146652.htm?ca=21_s

[Nick Drew]

Nick:

New member Antevante, has been searching for info about the digger. Unknown year, not Hymac green anymore. Runs good, no brakes, Deutz engine that runs well.

Holger talks about Åkerman colours.

I asked about 2-piece boom. I also wrote that you should be glad to see these pictures.

Antevante had some minor electricity problems (fire in the electrics!) when he tried to move it.
Some talk about the 2-piece boom.

Hi Robban,

Thanks for your help as usual

I have to say this machine is a bit of a mystery to me it does not look like a Hymac??

Yes the colours do make it look like an Akerman

It looks more like a Scandanavian Lannen or a Hymax ?? or something ??

I have certainly never heard of any Hymac that features a deutz engine,
Would be very interesting to find out the true identity of this machine.

Nick

[Nick Drew]

Hi Nick!

Im looking for some info about my machine, and Im pretty sure of the fact that i is a Hymac... The Hymac colour in still there in the inside;) Guess it a rare machine ive got if you dont recognise it.

Here is a link to the other Hymac 586S wich is for sale..

http://www.blocket.se/vi/14146652.htm?ca=21_s

Hi Antevante,

Thanks for sharing your interesting photos

Does your machine have an identification plate? if so please tell us what it says

Nick

[Antevante]

Hi! I been looking for other Hymacs like this for a long time.. And Ive never fond anyone like this. Until i found the one on "blocket". The same night I found this page.. I will search for the typeplates one the machine tomorrow, maybee it colud help us with the history. I know that the machine were sold new fron the Hymac dealer in Bromma (Stockholm). (A big sign on the cab wich tells that.

[Robban_C]

Nick, am I right in thinking that Jeremy knows a lot about Hymac? I think you said that in another thread.

[Nick Drew]

Nick, am I right in thinking that Jeremy knows a lot about Hymac? I think you said that in another thread.

Yes Robban,

Jeremy is extremely clever when it comes to the Hymac product, and he is very passionate about them, probably more so than myself

I think it has been a long term interest of Jeremy's, like me Jeremy spent a lot of his childhood around Hymac's.

The main difference is that I went on to have a career as a machine operator and as such most of my knowledge about the product is from an operators perspective.

Jeremy is certainly a good chap to have on the board

Nick

[Robban_C]

I have just sent him a PM on CMN regarding some help here.