Part 7 section B sidan 290 och framåt ?
The torque ratio of the
converter alters according to the load imposed on it. The stall speed of the converter is 1600 rpm.
At this speed the
stator is still stationary, but the
oil drag is such that the power of the engine is insufficient to drive the turbine.
With this condition maximum torque multiplication occurs, the maximum torque ratio is 2.1:1
The normal working
temperature is 82-99 C, the temperature of the oil should newer be allowed to exceed 121 dgr C
nu får ni fortsätta läsa själva, orkar inte skriva mer, antar att temperature sender unit sitter i toppen på bell
housing, kanske någon fyllnadsventilblock till turbinen ?
... left hand side of the
transmission case ?