Front end loader identification

[KuusamoMart]

Firstly, sorry for posting in English, but my Finnish (and Swedish, Danish and Norwegian) is not good!
I have a Volvo BM T430 that I recently purchased, it came with an unknown front end loader that I would like to identify.
The spacing of the loader arms is 1060mm centres. I have put some pictures below in case someone recognises this as a commercially made loader.

[Bengt Erik Eriksson]

Hello and wellcome.
I guess it is a Josve loader. But ot sure, it migt be a Norwegian Mustad. And most likely is the bucket tilt hydraulics custom made.
Easiest way to tell one loader from another use to be to study the locking between loader frame and the brackets mounted on the tractor.

Hope this helps point you in a direction to find the make.

[KuusamoMart]

Thank you, I will have a look at Josve loaders and check the points you mentioned.