Maskinistens Twitter-flöde  Stöd Maskinisten via Patreon  Maskinistens nätverk - information på svenska  Maskinistens nätverk - information på finska  Maskinistens nätverk - information på norska  Maskinistens nätverk - information på danska  Maskinistens nätverk - information på isländska
Forumindex

ForumindexForumindexMaskin-databasFotoalbumKalender-informationKöp & SäljDownloadsLexikonKontaktregisterMaskinistenin rikosrekisteri

Åkerman-register
Visa forum för mobila enheter

ForumindexMaskinforumÖvriga entreprenadmaskinerVäghyvlar

Motor Grader Nordverk 130 HVT with Volvo Penta TD70B Engine Wouldn't Start.

5 inlägg • Sida 1 av 1
Diskutera väghyvlar här

AndySM (trådstartaren)

#1 » 17:57:21, 21-07-2015
  • Överför markerat ord till lexikonet

Hi,

I have a motor grader Nordverk 130 HVT with Volvo Penta TD70B engine. For a couple of weeks the engine has been overheating after working for 2-3hrs and losses power during operation. The engine had problems starting and now it won't start. What could be a cause of such engine power loss and engine not starting at all?
AndySM
Fler än 1 inlägg
 
Blev medlem: 08:01:46, 19-07-2015
Norge
Maskintyp: Väghyvel
Maskin: Nordverk 130 HVT 1975 Model.



magloman

#2 » 20:43:44, 21-07-2015
  • Överför markerat ord till lexikonet

Could the timing on the fuelpump got shifted? Some wheel that has lost its settings?
Try check the timing on that.
)))) Min YouTube kanal: https://www.youtube.com/magloman ((((
Användarvisningsbild
magloman
Moderator
Moderator
 
Blev medlem: 22:53:49, 16-04-2008
Ort: Karlskoga
Sverige
Maskintyp: Traktorgrävare
Maskin: Volvo BM 6300 EHC
Rottne Rapid 8wd
Zetor 8011 / Ursus 385
Volvo BM T430

rospigg

#3 » 23:04:45, 21-07-2015
  • Överför markerat ord till lexikonet

Ohoj!

If the waterlevel in cooler is OK I agree with Maglomans ideas, check fuelpump timing!

//Rospigg
Användarvisningsbild
rospigg
Fler än 500 inlägg
 
Blev medlem: 19:41:44, 05-05-2012
Ort: Uppland
Sverige
Maskintyp: Traktor
Maskin: BM 36-57
Volvo t25 med perkins 4.107
MF 356 "rullstol"
BM 640 -69

magloman

#4 » 10:08:35, 22-07-2015
  • Överför markerat ord till lexikonet

Apparently is it very common on these Engines when they go hot and get powerless that the pistons get stuck in the cylinders. In one or more. Usually Cyl 3-5.
If you continue to run the Engine in this case, will the piston rings get stuck because the pistons melts and smears, thus gets the compressions so low it cannot start again.


Above overheard from a birds talk...
)))) Min YouTube kanal: https://www.youtube.com/magloman ((((
Användarvisningsbild
magloman
Moderator
Moderator
 
Blev medlem: 22:53:49, 16-04-2008
Ort: Karlskoga
Sverige
Maskintyp: Traktorgrävare
Maskin: Volvo BM 6300 EHC
Rottne Rapid 8wd
Zetor 8011 / Ursus 385
Volvo BM T430

AndySM (trådstartaren)

#5 » 18:25:09, 22-07-2015
  • Överför markerat ord till lexikonet

thanks guys for your feedback, the unit was not in use of a number of years, and we managed to get it back to life. the injector pump plunger got shifted like 2 months ago, of which I may totally agree to ´ve it retimed.

Is there any other possibility to change the engine with lets scania engine of the same power. any who ever have changed the engine could suggest the model.

Than guys once more.
AndySM
Fler än 1 inlägg
 
Blev medlem: 08:01:46, 19-07-2015
Norge
Maskintyp: Väghyvel
Maskin: Nordverk 130 HVT 1975 Model.


Återgå till Väghyvlar

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 3 gäster



Älmeboda Maskinservice

OilQuick

TK Traktordelar

Klaravik

Crazyride

Bra Verktyg

Motrab

Engcon

Scandcut

Astrak

Olsson Parts

Nya och begagnade
truckar på vstruck.se