actually managed to find a new vibe drive belt for me roller this week ..... old one's a bit tired and intermittent on the ol' vibe . So managed to put the roller over everything and really get it whacked down ready for the black stuff
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180907_10_41_23_Pro_zpsxoi6unkb.jpg
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180907_10_41_14_Pro_zpsws4wwxub.jpg
oh and the bloody acorn season has kicked off damned things rain down, in some order, when they get going.
Rolling them under the planings ain't an option...... if you don't want oak trees everywhere
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180907_10_46_02_Pro_zpsthc7fzf7.jpg
need to get the black stuff here and spread about PDQ
spent some time yesterday sorting a.n.other lil' job for Alex ...
needed a mount that'd take various cheek sets .... the primary one being one of my S50s I made for him a while back..
the S50s are the same width as the Lloyd mounting centres .... as in EXACTLY ..... those 6 x M20 bolts sit precisely under the S50 cheeks so ..... spacer plate required with all mounts tapped into it
M20s to mount the spacer adapter
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_14_23_24_Pro_zpsythb1rde.jpg
and M16s for the S type
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_15_23_02_Pro_zps1li7q6u6.jpg
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_15_48_33_Pro_zpsqqwnm5ow.jpg
had to fit the tags to carry the plumbing/valves, as they originally fitted under the M20 bolts holding the tiny head plate it arrived with.
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_15_57_16_Pro_zpsprx9wmjr.jpg
so we were ready for a trial fit
M20 SHCS,s were a mil. too long so had to grind them off flush ..... other than that
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_16_16_53_Pro_zpsg439sroj.jpg
perfick
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_17_22_29_Pro_zps1mbp94mk.jpg
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_17_22_12_Pro_zpsokitfyzv.jpg
had to tweak the plumbing a bit to get things to sit right ..... but it'll do .............. nicely
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180907_17_22_20_Pro_zpsbyrbrowz.jpg
mount hole sets are std kinshoffer 140mm x 140mm ctrs x 4no and 175mm PCD x 6no ...... same as all his other att.s .... keep it standard. ... and guess who else uses those 'standard' mount dim.s on his att.s too
went off for a trial fit this morning .... see if anything else needs tweaking, but hopefully not. ..... unlikely to be run under the SMP anyway, by the sound of it, as the flow rate is pretty serious
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180908_12_01_52_Pro_zps7hozypyk.jpg
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180908_12_04_46_Pro_zpsu80jhrb8.jpg
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/buckets/WP_20180908_12_04_53_Pro_zpsajgvnutw.jpg
it may be called a "Nanostar" .... but sod all 'nano' about it
pissed down just after we got it strapped down ...... hence i've been sat here most of the day