Maskinistens Twitter-flöde  Stöd Maskinisten via Patreon  Maskinistens nätverk - information på svenska  Maskinistens nätverk - information på finska  Maskinistens nätverk - information på norska  Maskinistens nätverk - information på danska  Maskinistens nätverk - information på isländska
Forumindex

ForumindexForumindexMaskin-databasFotoalbumKalender-informationKöp & SäljDownloadsLexikonKontaktregisterMaskinistenin rikosrekisteri

Åkerman-register
Visa forum för mobila enheter

ForumindexMaskinforumSkogs(bruks)maskiner

FMV 1800 crane

22 inlägg • Sida 1 av 2
Här finns alla skogs(bruks)maskiner

Tumphu (trådstartaren)

#1 » 16:32:59, 10-05-2017
  • Överför markerat ord till lexikonet

Hi,

I've seen most of here are Swedish, but i tought i'll ask help from here too.

Does anyone have any info about FMV 1800 crane? I've bought one old crane, it has some problems with control valves (and some missing parts too) and im searching parts list for that.

Does anyone have this partlist, or name of company /person that could help me with that?
Tumphu
Fler än 10 inlägg
 
Blev medlem: 16:25:41, 10-05-2017
Ort: Koski TL, Finland
Suomi Finland (finska)
Maskintyp: Traktor
Maskin: Ford 5610mk2 4WD
Ford 3000
Köpings S7C, year 1928, No: 25



raggsockan

#2 » 18:35:38, 10-05-2017
  • Överför markerat ord till lexikonet

hello
welcome to the forum

i found this , not sure if it helps
http://www.solhem9.se/broschyrbank_skog ... V_1800.pdf
just hit it like your making love to a porcupine, very gently

1 person gillar det här inlägget.
raggsockan
Fler än 500 inlägg
 
Blev medlem: 14:24:59, 06-12-2014
Ort: värmland
Sverige
Maskin: volvo t24-53 .lik
irus u900
canadia
gilson
nissan d21 96 turbo diesel
subaru legacy 92
fordson dexta halvbandare 60 smurfelina
ett schysst järnspett

Tumphu (trådstartaren)

#3 » 19:04:58, 10-05-2017
  • Överför markerat ord till lexikonet

That helps a alot! Thanks!

I havent even found specs for this. Alltho my swedish language isnt so good, so i cant seek info from forums or with google.

Thanks!
Tumphu
Fler än 10 inlägg
 
Blev medlem: 16:25:41, 10-05-2017
Ort: Koski TL, Finland
Suomi Finland (finska)
Maskintyp: Traktor
Maskin: Ford 5610mk2 4WD
Ford 3000
Köpings S7C, year 1928, No: 25

raggsockan

#4 » 19:06:41, 10-05-2017
  • Överför markerat ord till lexikonet

we can help u translate if there is eny words that you are wondering abbot
just hit it like your making love to a porcupine, very gently
raggsockan
Fler än 500 inlägg
 
Blev medlem: 14:24:59, 06-12-2014
Ort: värmland
Sverige
Maskin: volvo t24-53 .lik
irus u900
canadia
gilson
nissan d21 96 turbo diesel
subaru legacy 92
fordson dexta halvbandare 60 smurfelina
ett schysst järnspett

Tumphu (trådstartaren)

#5 » 19:18:59, 10-05-2017
  • Överför markerat ord till lexikonet

Thanks,

At the moment im looking info about the control valves and spare parts for that.
I assume FMV were using some common manufacturer hydraulic valves, so maybe there are some parts and gasgets available.

That datasheed you've linked, seems to be dated 1978 so i assume these models were made late 70s to early 80s, maybe even late 80s.
It seems to be nice and tiny for small tractors that were mostly used around that time.
Hydraulic pump capasity need seems to be little too (15-20l/min) which also points to that age (my Ford 3000 -68 has around 18l/min flowrate).
Another reason for small need is the size of crane.
Tumphu
Fler än 10 inlägg
 
Blev medlem: 16:25:41, 10-05-2017
Ort: Koski TL, Finland
Suomi Finland (finska)
Maskintyp: Traktor
Maskin: Ford 5610mk2 4WD
Ford 3000
Köpings S7C, year 1928, No: 25

Tumphu (trådstartaren)

#6 » 19:24:00, 10-05-2017
  • Överför markerat ord till lexikonet

This crane i bought, is welded to small truck bed, so all attachment points are removed. Also support legs are removed.
Im trying to find good pictures to see how things have been when its been new, and also figuring out how to remake them today (maybe wiser than they were then).
Tumphu
Fler än 10 inlägg
 
Blev medlem: 16:25:41, 10-05-2017
Ort: Koski TL, Finland
Suomi Finland (finska)
Maskintyp: Traktor
Maskin: Ford 5610mk2 4WD
Ford 3000
Köpings S7C, year 1928, No: 25

raggsockan

#7 » 19:27:05, 10-05-2017
  • Överför markerat ord till lexikonet

some picktures of urs crane woudent hurt :grin: :photograph:
u know , we love picktures here :)
just hit it like your making love to a porcupine, very gently
raggsockan
Fler än 500 inlägg
 
Blev medlem: 14:24:59, 06-12-2014
Ort: värmland
Sverige
Maskin: volvo t24-53 .lik
irus u900
canadia
gilson
nissan d21 96 turbo diesel
subaru legacy 92
fordson dexta halvbandare 60 smurfelina
ett schysst järnspett

Bengt Erik Eriksson

#8 » 19:36:22, 10-05-2017
  • Överför markerat ord till lexikonet

Hello!
About the valves. Can you take some cliseup photos of te valveboard? I guess there will be a lable at either end piece.
Utan lantbruk blir du naken, hungrig och nykter.

"Erfarenhet är den hårdaste läraren. Den ger dej provet först och lektionen efteråt" Oscar Wilde
Användarvisningsbild
Bengt Erik Eriksson
Fler än 500 inlägg
 
Blev medlem: 19:41:22, 31-10-2008
Ort: Gotland
Sverige
Maskintyp: Traktor
Maskin: AVANT 218 -11
MF 575-77
Farmall M -52 konverterad till perkinspuffra.
Zetor 3011 -63
Zetor 5511-71
Famall EMD50-54
Bm Volvo LM 640-69

Tumphu (trådstartaren)

#9 » 19:55:49, 10-05-2017
  • Överför markerat ord till lexikonet

Here are some pics that seller sent me. At this point i dont have the crane at my yard yet, transport company will deliver it some day soon (i hope :D ).

Bild Bild

I've got couple pics about the valves. I asked seller to see if there is any print / text on the model label. In pic we can see he has scracthed scrab out of it to see if there is text, but
as he didnt notice anything and didnt clean it more I assume there werent text left anymore.

Bild Bild Bild

On Ebay, these new 4- spool hydraulic valves doesnt cost much, like 150€ (around 1500Kr) including delivery.
These new valves also has this "Open center system", so all the time hydraulic fluid flows from pump to tank and it only uses small control pressure.
Only when needed, it takes more pressure from main line. Not sure does this old, original valve has the same system.

My Ford 5610 has around 70l/min hydraulic flow, so i assume it will need this open pump-to-tank line that oil wont warm too much.
Gladly I have this Deluxe valves on Ford, so i can change flow rate from switch, but not sure is this slower flowrate enough.
Tumphu
Fler än 10 inlägg
 
Blev medlem: 16:25:41, 10-05-2017
Ort: Koski TL, Finland
Suomi Finland (finska)
Maskintyp: Traktor
Maskin: Ford 5610mk2 4WD
Ford 3000
Köpings S7C, year 1928, No: 25

MN

#10 » 20:08:57, 10-05-2017
  • Överför markerat ord till lexikonet

you need 5 spools...
MN
MN
Fler än 500 inlägg
 
Blev medlem: 07:53:32, 27-08-2007
Ort: Europa

Tumphu (trådstartaren)

#11 » 20:18:46, 10-05-2017
  • Överför markerat ord till lexikonet

True... Sorry i always forgot that rotator...

Yea, 5 spools is correct
Tumphu
Fler än 10 inlägg
 
Blev medlem: 16:25:41, 10-05-2017
Ort: Koski TL, Finland
Suomi Finland (finska)
Maskintyp: Traktor
Maskin: Ford 5610mk2 4WD
Ford 3000
Köpings S7C, year 1928, No: 25

P Andersson

#12 » 20:30:22, 10-05-2017
  • Överför markerat ord till lexikonet

The hydralik valve you've got is a 5 spool Monsun Tison HV07, almost every FMV crane used these valves at that time.
I'm 99% sure it's made for open center system, other systems were more expensive.
Remember that the tractors hydralik flow is ratad at max rpm, so at lower motorspeed it probably would work just fine
Bushen utanför Ryd, nu med fiber för ist tröga koppartrådar

1 person gillar det här inlägget.
P Andersson
Fler än 500 inlägg
 
Blev medlem: 21:45:05, 11-10-2007
Sverige
Maskintyp: Traktor
Maskin: Valtra 6550
Hydrema 807
BM 650

Bengt Erik Eriksson

#13 » 20:38:35, 10-05-2017
  • Överför markerat ord till lexikonet

Yes it is most likely open center in that valve package. In rare cases it might been converted to closed center. (ie used with a John Deere tractor) in that case it is easy to convert it back by removing a plug inside the outlet port.
As you se there is a manufacturer lable on the first picture. Unreadable att this picture.
Utan lantbruk blir du naken, hungrig och nykter.

"Erfarenhet är den hårdaste läraren. Den ger dej provet först och lektionen efteråt" Oscar Wilde
Användarvisningsbild
Bengt Erik Eriksson
Fler än 500 inlägg
 
Blev medlem: 19:41:22, 31-10-2008
Ort: Gotland
Sverige
Maskintyp: Traktor
Maskin: AVANT 218 -11
MF 575-77
Farmall M -52 konverterad till perkinspuffra.
Zetor 3011 -63
Zetor 5511-71
Famall EMD50-54
Bm Volvo LM 640-69

Jac

#14 » 22:25:17, 10-05-2017
  • Överför markerat ord till lexikonet

Senast redigerad av Jac 22:38:39, 10-05-2017, redigerad totalt 1 gång.

1 person gillar det här inlägget.
Jac
Moderator
Moderator
 
Blev medlem: 12:08:59, 18-01-2006

Jac

#15 » 22:32:24, 10-05-2017
  • Överför markerat ord till lexikonet

Tumphu skrev:
On Ebay, these new 4- spool hydraulic valves doesnt cost much, like 150€ (around 1500Kr) including delivery.
These new valves also has this "Open center system", so all the time hydraulic fluid flows from pump to tank and it only uses small control pressure.
Only when needed, it takes more pressure from main line. Not sure does this old, original valve has the same system.


OpenCenter is probably the worlds most common type of valve because it is cheap and simple and works with a simple fixed displacement pump, like a gear pump.

However, a really cheap valve from E-bay will not have shock valves to protect the crane structure against overload. The fine control of such a valve may also be not so good because of poor design of metering notches in valve spools.
Jac
Moderator
Moderator
 
Blev medlem: 12:08:59, 18-01-2006


Återgå till Skogs(bruks)maskiner

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 1 gäst



Älmeboda Maskinservice

OilQuick

TK Traktordelar

Klaravik

Crazyride

Bra Verktyg

Motrab

Engcon

Scandcut

Astrak

Olsson Parts

Nya och begagnade
truckar på vstruck.se