Maskinistens Twitter-flöde  Stöd Maskinisten via Patreon  Maskinistens nätverk - information på svenska  Maskinistens nätverk - information på finska  Maskinistens nätverk - information på norska  Maskinistens nätverk - information på danska  Maskinistens nätverk - information på isländska
Forumindex

ForumindexForumindexMaskin-databasFotoalbumKalender-informationKöp & SäljDownloadsLexikonKontaktregisterCrimedatbase

Åkerman-register
Visa forum för mobila enheter

ForumindexMaskinforumRedskapGrävredskap och fästen

Druid's 'Drema's Druidfab Attachments !!

1743 inlägg • Sida 61 av 117
Diskutera grävredskap och -fästen här

V8Druid (trådstartaren)

#901 » 21:20:59, 02-05-2018
  • Överför markerat ord till lexikonet

Birthday girl yesterday .... hard to believe where the years have gone ... she was a young school girl, when I first met her and suddenly she's 32 with a little girl of very her own !!! :cool: :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180501_18_24_45_Pro_zpsvpdxv7ln.jpg

"Clara blow the candle mummy" :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180501_18_36_42_Pro_zpsivsgfpnv.jpg


WTF did the last 19 years go ???? :???: :???: :???:

got the last of the last load blocked up and split this afternoon ... :hurra:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180502_14_33_37_Pro_zpsw9uowzmd.jpg

bit more tidying up and got the ol' burning bin on the job, disposing of all the crud ... :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180502_16_38_09_Pro_zpsjgxxhdry.jpg

it's gonna be some vented bags for now I think :huh: ... get this lot sorted and stacked away .... :vissla:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180502_16_38_18_Pro_zpsdv1elaio.jpg

then maybe a few more loads, just to have a 'bit in hand' :smile: ...... save doing it again for a while :thumme: ...... plus I got an oak to come down and get the treatment too :grin: :thummar: ... once it dries out again :sad: ... jeez did we have a wild night, last night .. chairs, pots and all sorts, everywhere this morning !! :uupps: :uupps:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

5 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator



V8Druid (trådstartaren)

#902 » 23:26:23, 04-05-2018
  • Överför markerat ord till lexikonet

after mowing the damned lawn, yet again yesterday, :sad: :sad:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180503_14_59_56_Pro_zpsdei4biy2.jpg

had an hour or two spare, for a tidy up on the patch, after the 'logging campaign' ... :vissla:

try op.ing a duck with this lil' fella on yer lap :grin: .... only way to be sure of WTF he is ..... :???:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180503_16_16_24_Pro_zps0v25btgk.jpg

he has an annoying habit of appearing either, on the lower chassis, or in front of the wheels, :eek: so easier to have him on me lap, 'til he exits onto the chassis as I come around ... then it's all stop, find him and take him down the house, out the way :aaargh:

shifted the bags, then relocated the cages out of the way for now, 'til I decide where they're going to live for the winter .... got the drop on disconnecting the bag loops off the lifter from the cab too - speeds things up, on your own !! :grin: :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180503_17_55_47_Pro_zpsal4up6pg.jpg

looks a bit more 'organised'/tidier than last week ..... :thumme:

and these can sit here for now ...... must get some vented bags bought, for now, :vissla: in the absence of any more suitable receptacles - these transferred and the rest bagged up and parked ....... :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180503_17_56_26_Pro_zpspbsykx21.jpg

ready for some more :smile: ..... or dismantling said oak, that is in need of being on the floor ..... :vissla:

very overcast all day today and threatening rain all day, although it never appeared :vissla: ...... been on the strimmer most of the day, tackling all the bits I can't get a mower at :sad: ..... in anticipation of it actually drying enough over the weekend to get 'the Dane' out and stretch its legs, on the grass beside the drive :thumme:

tomorrow may well be a bit of time in the 'Drema though, :grin: if it doesn't rain tonight :huh: .... stockpiling some sh-1-t, ready for relocating ... offsite :thummar: :hurra:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

3 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

magirus

#903 » 09:41:11, 05-05-2018
  • Överför markerat ord till lexikonet

V8Druid skrev:after mowing the damned lawn, yet again yesterday, :sad: :sad:


There´s the advantage with winter and snow, no mowing no lawn :cool:

2 personer gillar det här inlägget.
magirus
 

V8Druid (trådstartaren)

#904 » 11:57:20, 05-05-2018
  • Överför markerat ord till lexikonet

magirus skrev:
V8Druid skrev:after mowing the damned lawn, yet again yesterday, :sad: :sad:


There´s the advantage with winter and snow, no mowing no lawn :cool:


well there is that aspect to it Mags :vissla: .........but :sad: :sad:

it's easier to get enthused about sitting on a ride on, in the sun, :thummar: than trudging around in this stuff, :uupps: :sad: freezing yer nuts off :skratta3:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180318_14_10_27_Pro_zpsokdfznfr.jpg
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

1 person gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

V8Druid (trådstartaren)

#905 » 01:45:47, 06-05-2018
  • Överför markerat ord till lexikonet

well the sun has shone on the righteous .... and Druid central today ... :skratta3:

Have had the day to myself :thumme: .... the boss, Clara and her mum have been out, sort of baby sitting Shem, in Bristol as his mum has been at her sister's 'hen' weekend do there. He won't bottle feed :sad: and so has to be within relative feeding distance every 4 hrs or so, which makes for an interesting weekend for her. :vissla:

So, whilst conditions were right .... and the ground is relatively dry .... on me patch at least, some 'digging' was had :grin: ...... after I'd made a bit of space to park a stockpile, ready for transfer at a later date. ;)

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180505_12_55_41_Pro_zpsikdsklr4.jpg

had a bit to shift/juggle about first, including all me buckets, forks, grab, etc., for under the VA-r and still leave me enough space to get where I needed to be !! :huh:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180505_14_39_35_Pro_zps4szroirk.jpg

ripping out the mudstone bed was hard going .... should have sorted me ripper by now .... but haven't !! :sad:
some careful use of my favorite geith saw it peeling up reasonably well, as long as I didn't get greedy :smile:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180505_18_18_13_Pro_zps8dfatpy7.jpg

was doing reasonably well, getting an area down to a level-ish bed, from a stand on the planings and was about to move up onto the ramp to get a pull along the edge :thumme:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180505_19_45_42_Pro_zpsxlbb1f9x.jpg

when Pam's elderly 'farmer brothers' cousins arrived ....... with the boiler out of their Aga....in need of some attention .... bugger!!!! :sad: :aaargh:

three hours later !!!!! :sad: :sad: after performing some minor miracles on paper thin seams, I was relatively confident that I'd got the leak(s) !!!
had to build everything back up, before I could make a secure seam again !! :huh: :vissla:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180505_17_06_44_Pro_zpssxhnpedi.jpg

I used to make firebox boilers for Agas and Rayburns for a local guy who used to install/modify existing units, many years ago - done dozens of 'em - in 6mm plate.
This bloody thing was a combination of 2mm stainless and 3mm steel .. amazed it had lasted as long as it had ..... and the welding on it was sh1te!!!! :aaargh:

so whilst it cooled off, we had a cuppa, before sticking it back in their pick up, so's they could go rebuild their Aga.
'Twas now gone six and thought I'd better call it a day .... the sound of scraping mudstone was just a tad on the loud side .... and I was ready for me tea !! :eat:
Damned near seven by the time I'd tidied up and put the old girl to bed for the night ....... running out of space quietly !!!! :vissla:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180505_18_29_46_Pro_zps6zh9yfqp.jpg

I hadn't finished the last mouthful, when team granny and sproglets returned, exhausted from a long day's play :vissla: and in need of feeding !!!!

I got left 'holding the baby', in the shape of this lil' fella, :uupps: whilst they ...

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180505_20_11_29_Pro_zps2dnhpwgl.jpg

..... fed Clara and themselves :thumme:

I'm not the most experienced at entertaining six month olds, but 'we' managed :grin: .... the mogs assumed sentry duty and kept him fascinated, for quite some time .... they're 'canny' lil' creatures .... parked themselves just out of arm's reach :grin: :cool: :thummar:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180505_20_24_38_Pro_zpsmkl6zlbq.jpg

He's sort of had some semi-solids, as they're trying to wean him .. flatly refused a bottle of his mum's milk ... no way - no how was he having it, at any angle we parked him at :sad: :aaargh: ....... we'd managed to wear him out by nine :thummar: ... been asleep since, but pretty sure that when his mum arrives, any minute now, he is gonna be ready for ........ Oh and here she is .....YAY!!!!! :hurra: :hurra: :hurra:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

4 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

V8Druid (trådstartaren)

#906 » 01:29:30, 07-05-2018
  • Överför markerat ord till lexikonet

sat chilling in the sunshine today :grin: ----- for a change :vissla: and it came to me what I was doing four years ago this weekend :thumme: ..... kick off at 08.00 on the Saturday morning ...... :thummar:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/box%20day/2014-05-03%2008.17.19%202_zpsxqijzb5v.jpg

back at the house by 09.00 ..... with #1 :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/box%20day/IMG_5474_zpsl34ehat9.jpg

followed by #2 .... by 11.00 :grin: :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/box%20day/IMG_5558_zps4oadkhkd.jpg


and #3 in and finished by 13.00 ....... :thummar: :cool:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/box%20day/IMG_5597_zpsdyer5aig.jpg

a well planned and executed day :vissla:
Pam was on coffee & camera duty ..... and hell did she take a few :uupps:

for those who're either interested ........ or gluttons for punishment ...... :smile: :smile:

http://s1275.photobucket.com/user/v8dru ... /box%20day

doesn't seem like four years ago :uupps: :uupps: :huh:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

3 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

magirus

#907 » 14:26:14, 07-05-2018
  • Överför markerat ord till lexikonet

Well, Time flies like arrows and Fruit flies like bananas! :mrgreen:

3 personer gillar det här inlägget.
magirus
 

V8Druid (trådstartaren)

#908 » 01:03:33, 08-05-2018
  • Överför markerat ord till lexikonet

aye - - it's remarkable where those 4 years have gone TBH :uupps: :uupps: ........ won't get them back, for sure :sad: :sad:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

magirus

#909 » 09:26:25, 08-05-2018
  • Överför markerat ord till lexikonet

Nope! :sad:

1 person gillar det här inlägget.
magirus
 

V8Druid (trådstartaren)

#910 » 00:37:21, 10-05-2018
  • Överför markerat ord till lexikonet

the 3 ft Akerman came out to play today :grin: :grin: :vissla:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_10_38_38_Pro_zpsrsozxzdc.jpg

those Bofors teeth did a fine job on ripping up the rock bed and finished off with me favorite Geith edge-er

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_11_23_13_Pro_zpsoycwnn4j.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_11_32_24_Pro_zpspyegq5en.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_11_32_35_Pro_zpsgccaqjsv.jpg

for trimming down a few ridges and loading 6t of it into the Thwaites for starters ... had a job for some fill in the gully where the rocks were stacked. :thummar:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_17_59_27_Pro_zpssbtj84ub.jpg

the spoil pile grew a bit more too ..... :vissla: :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_15_16_06_Pro_zpskagjmhyw.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_15_37_13_Pro_zpsxxdxnnwv.jpg

and got the bank reasonably shaped up ..... :thumme:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_17_32_03_Pro_zpsgmwozc2q.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_17_07_12_Pro_zpsbgpyxdeq.jpg

first south westerly we've had in a week .... needed to get some rubbish burnt. :smile:

Interesting bed of rock under the mud stone layer ..... like slabs with joints, from what I see so far ???? :???: :???:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180509_16_50_06_Pro_zpslb8jbqvq.jpg

Batter is going to need a bit more 'light attention' once I've got the bulk of it out and been resisting putting the VA-r on all afternoon, due to the rock that needs to be ripped out at the lowest point -- bloody hard!! :uupps: :sad:
looks alright (I think) .... for a 3 ft bucket in a concave curve - first pass anyway !!
Little bit of finesse-ing required here and there :grin:


AND .... that oak has gotta have it soon especially whilst the deck is relatively clear :vissla:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

4 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

V8Druid (trådstartaren)

#911 » 00:52:38, 11-05-2018
  • Överför markerat ord till lexikonet

couple more pix ...... from the top of the spoil heap this evening :grin: .... bit dark for pix really :sad:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_21_11_04_Pro%202_zpslg9se7nw.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_21_11_09_Pro%202_zps0yvjtz1q.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_21_11_21_Pro%202_zpsc1tvqteh.jpg

getting a bit crowded down there

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_21_11_27_Pro%202_zpsb9oymstz.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_21_11_38_Pro%202_zpsf5b7yczi.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_21_11_48_Pro_zpsqdfpklzr.jpg

been shifting more stuff down from teh upper level this afternoon ...

me saw bench - 3ph so not been used in a while :sad: ..... generator required - urgently :vissla:
Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_17_14_32_Pro_zpspe0y5yaz.jpg

2t gantry hoist for the ridge of me shed ;)

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_17_23_57_Pro_zpsaxkjyh3k.jpg

and its block

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_17_24_03_Pro_zpss63zvaxm.jpg

poor old girl is not wearing well, under a tarpaulin :sad:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_17_25_42_Pro_zpsgisl5pel.jpg

if he's not under me feet ---- he's under the wheels ---- or on the lower carriage - -- - somewhere :uupps: :sad:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_15_32_23_Pro_zpsftw6jfqr.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180510_16_04_21_Pro_zpsubx6vccj.jpg

I prefer him either under me feet or on my lap ... least I can see him then :huh:

a part of the cause of an afternoon start to the 'stuff shifting' ..... :sad:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180510_14_11_21_Pro_zps8zcvm4cm.jpg

All massacred again for a few days .... sposed to rain here again tomorrow afternoon, so it'll need doing again Monday ..... gonna be wet Sunday too apparently :sad: :sad:
I've decided that a VERY regular cut regime is the way to an easier life on the grass front ... as long as it's dry enough to get on it. :vissla:

The lawns look equally 'short' :thummar: :grin:

Trying to summon up the enthusiasm to do the bank on the left of the drive .... cutting it's the easy part .... it's the collecting it up's the killer :aaargh:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

4 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

V8Druid (trådstartaren)

#912 » 02:29:48, 14-05-2018
  • Överför markerat ord till lexikonet

something different last night.


Neighbour about 1/2 a mile away .... as the crow flies .... two by road, has this ....


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_20_25_39_Pro_zps4fogteuw.jpg


Ovlov EC15B ....


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_20_03_11_Pro_zpsvnmcngxi.jpg


not had it very long and giving strange issues. Contacted me through a n other forum ..... guy I've not seen in 40 years and we're 1/2 a mile apart !!! LOL


could I possibly lend any assistance with some trouble shooting ... he'd seen me gauges in a thread on there.


Not having seen John in such a long time, was quite a surprise to find he was so close ... so yeh, I was up for a catch up and a shufty. :thumme:


Machine is losing all hydraulics intermittently and if provoked will stall the old girl too ??


After a bit of a catch up after I'd arrived, we got down to the beast ... three Staufs ..... :vissla:


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_19_53_08_Pro%20marked_zpsrewojycc.jpg


A appears to be directly adjacent to the main P line into the chest/block ......
C is on a block which I can only assume is a pressure reducer valve from main to servo pressure - has a P and a T and feeds the servo circuits.
B is a bit of a mystery and looks for all the world like an LS line ??
the pump that's on it though is a gear type, fixed displacement, not a VP, which'd need the LS line to function, so I'm a bit nonplussed as to quite WTF it does?????


Stauf A produces no movement on the gauge - AT ALL - no matter what you try/do/operate .. this is supposed to be where main circuit pressure is measured at ???


Stauf B produces 140 bar when a motion is operated - any motion


Stauf C is showing 25 bar, constantly when the machine is running.


the MRV is missing its seal cap, which is lying under it, in the guts -- yellow thing, under the blue MRV which is under Stauf B and shows signs of having had an allen key in it, but no witness marks in the paint on the lock nut or the body ???


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_19_52_09_Pro_zpsa0teictx.jpg


I also discovered that it's been 'gotten at', before John's ownership, by a not so clever chap, who I do not rate at all !! I know him of old -- and his 'work' :sad: :sad:


I'm told by a reliable source that MRV should be set at 180 bar and the servo circuit pressure should be 35 bar.
if the MRV has been wound down, I'd see it on the body, devoid of paint on the threads, but it wouldn't then make her stall??


if it's been wound up ( ? ) which is more likely, I'd expect to see a LOT more than the 140 bar I'm seeing at Stauf B.


Any one else have any suggestions/information/knowledge of these beasties ... a hydraulic schematic'd be awesome ...and in particular, what sort of pump is fitted to 'em - FD gear or VD?

the reason I ask about the pump is ...... this one appears to have been off , or perhaps replaced ..... note the bodgery/stilson marks on the hyd fittings and the angle the jubilee is sat at on the feed hose :uupps:


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_19_59_32_Pro_zpsnhxl4hpy.jpg

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_20_02_41_Pro_zps3ebibfhb.jpg

and wondering if the right pump is fitted to the machine ??????? :???:


the mount face looks like it has had a larger pump fitted, previously ?? :???:


Spent most of yesterday evening, after I got back, from John's, proof reading, punctuating and spell checking half of Pam's daughter's dissertation, for her PGCE course she's been doing, this last 12 months, followed by the other half this morning, after I'd un-fried my brain, with a few hours sleep. :thumme:


So wasn't the earliest of starts for my job for the day ..... :huh:


four down ...... :smile:


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180513_19_03_22_Pro_zpskxyv78xl.jpg

reckoned on another two to go.... :vissla:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180513_20_07_14_Pro_zpskgcr0ohf.jpg

aside from the re-packing of the three dumpies, currently sat on me cages!! :sad:
Squeak was exhausted by all the effort ...... of watching me do it all ....... :skratta3:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180513_14_56_23_Pro_zpspyuipl7g.jpg

Managed to blag myself a few pallets on Friday on the way home from some 'cherry shopping' ..... :grin:


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180513_20_11_19_Pro_zpsnyusgckx.jpg


and got me 'cable collection', relocated onto one of 'em Friday evening, 'fore committing the remains of the previous pallet, under it all, to the burning bin.
This lot came home from me workshop .... wasn't leaving it there for their demo boys....I have a use for it and fixtures and fittings weren't included in the sale !!! .. enough there to sort my new shed's requirements ... and some !! :thummar:


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180513_20_10_16_Pro_zpsj4rsspxh.jpg


Saturday day'd been a write off, as far as doing anything was concerned, other than entertaining Clara, whilst her mum frantically finished off her dissertation, for our perusal. :uupps:


weather forecast is pretty good for the week, so might even manage to relocate some spoil, if yon field's dried enough!! :thumme:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

4 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

V8Druid (trådstartaren)

#913 » 02:00:55, 15-05-2018
  • Överför markerat ord till lexikonet

well the guys on the CEF are all telling me that there should be a triple ganged pump on that lil' Ovlov :sad:

like this one
Bild
Originalets URL: https://i.ebayimg.com/images/g/UJ4AAOxy2CZTX775/s-l1600.jpg

https://www.ebay.co.uk/itm/Volvo-EC15-H ... xy2CZTX775

also got sent a couple of schematic pix too :hurra:

Bild

Bild

Bild

:cool: :cool: :cool: :grin: :grin:


I've had a slightly more productive day here ..... :thumme:

Got a few loose bags of stone onto their new pallets and me pallet full of cable down off the top :smile:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180514_17_23_47_Pro%20mod_zpsjwag103h.jpg

Lifted the three dumpies off the cages and hoiked the new vented bags up on there instead .... :vissla:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180514_12_41_27_Pro_zps7tgspmu2.jpg

the bag lifter makes life so easy for getting them air-borne and exactly how you want them, putting them back down !! :thummar:

Room for another three up there !! :grin:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180514_12_41_39_Pro_zpsrqewmfzx.jpg

Just about ! ..... still got more to bag up, apart from those three to re-bag and also lifted out a sided pallet full of blocks, I'd sort of forgotten about :vissla: ..... emptied that one out to give it all an airing .... top and bottom layers were pretty dry, but the centre'll benefit from a few days in the sun. :vissla: :smile:

Was going to re-bag the three dumpies this evening but forgot it's early bath night .... we've brought my treatment night forward to Mondays .... had to a few weeks ago, due to not being able to do it one Tuesday and it's a lot more convenient, as Tuesdays are a Clara day and we're both knackered after a ten hour day with the little 'un, so we've stuck with the Monday. :vissla:

Did get a couple of hours in with the bucket earlier though and advanced the batter a few more feet ...... :grin: :thumme:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180514_15_38_03_Pro_zpsspjigzo3.jpg

running out of room for spoil storage though .... :sad:

Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/my%20bucket%202/WP_20180514_17_23_13_Pro_zpscluashbo.jpg

Me an Clara are gonna have to have a walk in the morning and inspect yon field access ..... could do with losing several dumper loads, before I can get any further ..... and have a look at an alternate hole for some stone/rubble, in a gateway that's washed out - big time !! Getting to it may prove exciting though :uupps:

That's it for tonight ..... 7.30 kick off with the lil' 'un's arrival, in the morning ... will be a looooong day, as usual :uupps: :uupps: :coffee:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:

5 personer gillar det här inlägget.
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator

Jac

#914 » 12:41:10, 16-05-2018
  • Överför markerat ord till lexikonet

V8Druid skrev:
Ovlov EC15B ....


Bild
Originalets URL: http://i1275.photobucket.com/albums/y450/v8druid/scans/WP_20180512_20_03_11_Pro_zpsvnmcngxi.jpg


According to datasheet it is LoadSensing hydraulics. LS-valve block configured for operation with fixed pump is my guess. Most likely single pump then.
Nixs here on the forum knows these machines.
https://www.volvoce.com/-/media/volvoce ... f?v=ICEyPw
https://www.volvoce.com/-/media/volvoce ... f?v=cfg5Pw

1 person gillar det här inlägget.
Jac
Moderator
Moderator
 
Blev medlem: 12:08:59, 18-01-2006

V8Druid (trådstartaren)

#915 » 23:18:13, 19-05-2018
  • Överför markerat ord till lexikonet

Jac skrev:
V8Druid skrev:
Ovlov EC15B ....





According to datasheet it is LoadSensing hydraulics. LS-valve block configured for operation with fixed pump is my guess. Most likely single pump then.
Nixs here on the forum knows these machines.
https://www.volvoce.com/-/media/volvoce ... f?v=ICEyPw
https://www.volvoce.com/-/media/volvoce ... f?v=cfg5Pw


Thanks Jac .... I now have a 660 page manual for it :grin:

( I have no idea HTF I am going to be able to upload it though Holger - too big for my net - could split it into half a dozen PDFs and you can re-assemble it ;) )

They do do a VD pump version ....... but also a single stage gear pump version too, as is on there :vissla:

It's either had a VD pump replaced with a (much cheaper) gear unit, or someone has been pissing about with it ... big time!!

Going to reset the MRV on it to 5 bar less than what the pump is putting out and see how it behaves then?

I am of the opinion that the MRV has been wound in so far that the pump can not overcome it and is therefore stalling the motor, unable to dump to tank :vissla: :sad:

Thoughts gentlemen ???????? :vissla: :???:
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!! :uupps:
Användarvisningsbild
V8Druid
Fler än 500 inlägg
 
Blev medlem: 01:48:20, 19-02-2015
Ort: Druid central, just East of Pandy, Nr. Abergavenny, S. Wales, UK, 3rd rock from the Sun
International
Maskintyp: Grävmaskin (hjulburen)
Maskin: '99 15 tonne Hydrema Weimar M1500 compact wheeled excavator with Druidfab VA-r tilt rotator (rototilt)
'86 JCB 3CX SITEMASTER Extradig --SOLD
2002 JCB 8015 - 360 excavator
'97 6 tonne swivel skip Thwaites dumper
3 tonne Tico Humperdumper
Fleming Manor Micron 1/2 ton walking excavator


Återgå till Grävredskap och fästen

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 1 gäst



Älmeboda Maskinservice

OilQuick

TK Traktordelar

Klaravik

Crazyride

Bra Verktyg

Motrab

Engcon

Scandcut

Astrak

Olsson Parts

Nya och begagnade
truckar på vstruck.se